Track lights are awesome for spotting light. Almost every shop on the market and even some houses have a line of track lighting today. But the excitement gets dull when one of the bulbs runs out of power. It needs removal and replacement then and there.
The thing is, if you don’t know how to remove a halogen bulb from track lighting, you may end up making a total mess there.
Need a fast solution? Follow our step by step guide to removing the bulb from track lighting to find out how to do it in style.
Bulb Failure? Here’s How You Can Get Rid of It
Before we move towards the process of removing a halogen bulb from the track lighting, we should put some light on how to select the best bulb for a track lighting system. It’s always better to use the most suitable bulb for the track lights to prevent the bulb-failure.
Use the Bulb with the Right Wattage
There is a maximum wattage level imprinted on the light’s inner side. Select the bulb that matches the right amount of wattage requirement of the light. Make sure you are not overloading the bulb with higher wattage. This will make the bulb suffer from early damage.
Choose the Right Brand
Brand loyalty matters a lot. If you are using the cheap bulbs available on the market, you are surely going to suffer very soon. Try to find out the best brands of bulb that suits the light holder of the tracker.
If you are unsure of what is the best suiting bulb for your light tracking system, you can always search the internet or look for the instructions on the packaging the tracking system comes with.
The best suiting bulb will have a matching end that perfectly sets in the light holder. That’s also an indicator of the most suitable bulb.
How to Remove Halogen Bulb from Track Lighting?
Now that you know how to take care of the bulb for the track lighting system you have, we are going to find out how to remove it from the system in case of damage. Carefully follow these below-mentioned steps for the best result.
Step 1: Turn the Light Off
The very first thing to do is to turn the switch off. Make sure the lighting doesn’t have any power supplied while you are touching it. Inform everybody else knows you are working on the light so that they don’t accidentally turn it on while you are up there. You don’t want any shock, do you?
You should keep one fact in mind; if you are working on removing a halogen bulb, you have to take at least a 5 to 10 minutes break after you switch it off before you can put your hands on it.
It’s because the halogen bulb gets very hot while in use, and you may burn your hands if touched immediately after the turn-off. For an LED bulb, that’s not the case.
Step 2: Wear Protective Gear
As we have discussed earlier, halogen light is to be removed with utmost caution. You should never try to remove it using just your bare hands, especially if you are removing it right after you have just turned the switch off.
Moreover, when you touch the bulb with your empty hands, the glass body catches oil from your skin. The oil is left printed on the bulb. Moreover, the oily area of it gets hotter than all the other areas and can lead to the drainage of halogen out of it.
This can cause the bulb to be subjected to early wear and tear. That’ why you need to wear a pair of rubber gloves before you attempt to touch and remove a halogen one.
Step 3: Decide Whether to Unfasten the Fixture
Generally, you can easily take the bulb off the track light by unscrewing it. But some light tracks may require the track to be taken off before you remove them. If that’s the case, you have to open up a piece of the fixture if you want the bulb to be removed from there.
It entirely depends on the type of light tracking you are using. If you are not quite sure how to remove the bulb, you can look for the instructions the light tracking comes with. That can lead you somewhere accurate.
In case you need to remove the fixture from the track-lighting system, what you need to do is to rotate the base first. Look for any type of screws or pins in it that lock the fixture tight on the base.
Loosen the screws and pins, if any. Now swing the fixture with an anti-clockwise direction. Make sure you are making a 90-degree angle here. This way, it should easily come out of the holder straight to the palm of your hands.
Step 4: Removing the Bulb
Usually, if you want to remove CFL, incandescent, or LED bulbs, you can do it just by unscrewing them anti-clockwise. As for track lights, they often come with specific bulb types that need to be removed by unscrewing, unplugging, or even twisted.
Try to look into the bulb first before you are attempting a removal. Swing it between the sides and simultaneously try to pull it towards your side. Try to notice if there is any movement. Usually, at this point, the bulb starts to move slowly.
One thing you need to know is that some bulbs require to take their cover off before you get to touch it. If you have got no clue how to access the bulb, try to read the user-manuals or instructions.
Now that you know how to remove a halogen bulb from track lighting, you can easily take charge of your home lighting system. Forget about contacting an electrician every time you need a replacement. It’s easier to do on your own than you thought it to be!