Don’t you want to create a unique feature in your car in an inexpensive way? Installing strip lights in your car can add some amazing style and color to the decor.
In recent times, installing LED strip lights has become a craze among many. They literally make your favorite vehicle a center of attraction by dropping a lot of jaws.
But before you install them, it is important that you know every detail about how to install LED strip lights in a car.
In case you’re looking for a solution but can’t get it anywhere, your search finally halts here! This article will walk you through the complete installation process.
How to Install LED Strip Lights in a Car?
Keep on reading as I guide you through the steps of installing the strip lights in a car. The steps will come handy to solve your DYI issues.
Understanding LED Lights
These lights are diverse forms of lighting that are unlike others. There are many contour and deviations, but mostly it consists of numerous individual LED transmitters assembled on a narrow flexible circuit board that operates on low potential DC power. Also, there are no strings to burn out.
Why Use LED Strips in a Car?
There are numerous advantages of using these strip lights in different ways. First of all, they consume less electricity while operating, which makes them most affordable to use, and in the meantime, they allow you to examine things with much larger induction with no fear of wasting extra electricity.
They come with color versatilities as well and guarantee you a huge life expectancy with their immovable attribute. You’ll find these strip lights are very flexible to use, and the fact that they produce less heat is a cherry on top.
As they have a very covenant design, they will fit in every car that other types of lighting cannot.
Steps to Install LED Strips in a Car
I’m keen on helping others, so I have put my best effort to formulate the following step-by-step comprehensive guide to make you easily grasp how to install LED strip lights in a car.
Setting the LED Strip
To get started, you need to make sure you have the right set of tools. These tools generally include strips, wire, and zip ties.
First, you have to set the LED strips on the underside of your car. Make sure that the strips are securely attached underneath your car.
You may take the help of bolts, brackets as well. It’s better if you secure the strips with zip ties or any other substance. It will help the strips to stick together and be stable there.
It will be a good idea if you have someone to help you out, holding the LED strip while you are attaching the strips. But it won’t be a big deal if you are alone while doing it, you can use double-sided tape for mounting the strips in your car before you tie it up permanently.
Widening the Wires
For completing this step, you need- LED Ribbon and Wire. Extend the wires and route the wires to connect them to the module box.
If you want your strips to cover the rear bumper as well, you have to make sure you have extended wires which will cover the front of the vehicle too.
There are multicolor LED lights with a combination of blue, red, and green as well. You have to make sure you have switched to get the color change so that you can change the color anytime you want.
Besides, you can use overhead dome lights by sticking the dome lights and follow the same way to connect the dome light.
Connecting the Wires
So here you should be grabbing some LED ribbons and screwdriver so that you get to check the connections of your wires. The upper side of the engine bar, the battery, and the module box should be connected with the wires. Moreover, the module box has to be connected with the underbody of the LED strip.
Now it’s time to connect the undercard strip and LED strip power cord. You have to tap the red wire to the positive endpoint and black wire to the negative endpoint of your strip, which is connected to the battery to check the installation process.
Placing the Cluster Box
It’s time to place the cluster box, which is the closest one to the battery. A Module box would come in handy to perform this step.
You have to make sure you put it away from the engine to avoid any kind of damage. Furthermore, you have to keep the location dry where you place the module box.
The cluster box is well designed, so you don’t need to be worried about any damage. It would be better if you broaden the antenna of the box to get better response weather your bonnet is closed.
Wiring and Creating a Passageway
Get a Screwdriver out of the toolkit and extant the tap light of the LED by which you can turn the power on and off. Once you are done, it will transfer power to the wires. You have to make sure about the alignment of the extension you made while covering the whole car.
Use the screwdriver to connect all the wires. Once you are done with this, fit all the positive ends to the terminal. Do the same for the negative wires as well and tighten up with the screwdriver.
Turn on the Switch and Test
You are all set now to turn on the switch! Give it a good try by turning the lights off and on.
Install the switch wherever you prefer. You can also use the wireless switch, which is flexible to use. Now try by yourself to check whether it’s functioning properly or not.
As you have gone through an easy and rational way of installing the LED, I believe the answer to your query “how to install LED strip light in a car” has rightly been answered.
It should now be quite easy for you to perform the whole process all by yourself. So, what are you waiting for? Start enjoying having the most colorful and coolest car in your area.