Everybody knows a fluorescent light. It’s a thing that you often get to see wherever you go, your office, university, school, or even stores. While fluorescent lights are widely used around the world, they’re steadily being challenged to extinction as we have LED ones now.
Why? Because LED ones are cheaper, claim less maintenance, less costly, and, most importantly, provide greater lumination. So why use the fluorescent ones anyway?
If you’re already up for some changes and wondering how to convert 4ft fluorescent light to LED, you can wave off your worries as we have got you covered. Follow the simple steps to learn the know-how.
How to Convert a 4ft Fluorescent Light to LED?
In case you have been thinking that converting a 4ft fluorescent light to LED is a tough nut to crack, we have got some good news for you. There are always different ways to do this. Although it may not be that easy, it is still very convenient if you are following the right steps.
Decide Which Color and Specs to Go for
Before you decide to start the conversion, you need to find out what type of color you need for the LED light. They have a different color combination for different temperatures.
If it’s placed at a low temperature, the color should be orange or a bit reddish. This is a perfect fit for you if you want to keep your room lit with decent lighting, or you want to use a dimmer effect for your bedroom. That can help you sleep, as well.
As for high temperatures, you should select the white ones. The usage of white lights is most commonly found in the library, class, working environments, etc.
Select the Correct Size of the Light
You will need the same sized LED light that matches the height of the 4 ft fluorescent one that you are using. Use a measurement tool to measure the size and height for precision and perfection.
Measure the diameter of your fluorescent bulb. You can find this on the label of your bulb, usually found on the pack.
Limit the Time for Installing the Light
You don’t have time? Need to convert your lighting system as soon as possible? It’s better for you if you go to the nearby shop and buy an LED tube that can fit perfectly with your existing installation.
Make sure you buy a UL type-A. What this will do is save your time for installing the lighting system, and you will get enough energy to illuminate your surface.
Turn the switch on after you connect the tube with your current setting. Even if it costs a few extra bucks, it will be justified by the amount of cost it saves from your installation process.
Update the Light to UL Type B
The UL Type-B lights are most commonly known as ballast bypass. You don’t need to replace your old ballasts with these direct wires. These can bypass the ballasts. That means you don’t need to purchase new ones, and you get to save some bucks there, as well.
Remember to discuss with an expert electrician or someone who deals with light tubes. You can find some important instructions for the UL Type-B.
The most crucial part of the conversion process is the installation of the wiring because you need the exact supply of voltage for your LED tube to perform perfectly.
What Socket Type Should You Use?
Socket type plays a vital role in this conversion process. Usually, there are two types of sockets: a non-shunted one and the shunted one. LED tubes use the non-shunted one, while the fluorescent ones use the shunted socket.
If you have been using a T12 socket, you are in luck. Your LED installation will be pretty neat and clean for you. But if you are using a T8 or T5 socket, you can’t install the LED tube.
One solution to this is that you can convert the T8 or T5 sockets to T12. Then you can attempt to go for the installation. Using a T12 socket saves you bucks too, as these are cheaper and quite efficient.
Difference Between One-End Ballast Bypass Tubes and the Two-End Ones
There are a couple of challenges for ballast bypass tube conversion. The first one is that the light manufacturers provide both single and double end bulbs. Some may not have the right socket types to match the ballast bypass tubes.
As for the difference between them, a single-end bulb has wiring that goes towards the sockets at the end side of the fixture. The other side of it is not wired at all.
Using a double-end bulb, you just wire the hot wire to the sockets on one end of the bulb and the neutral one on the other end.
Get a Universal LED Tube If Possible
Although this may cost you a bit, getting a universal LED tube can save you from many hassles. You can install these on anything, no matter if it’s T8 or T12. These tubes work great in all types of facilities. All you need is to remove your existing fluorescent lights tube and replace it with the new LED one.
It is always a smarter and energy-efficient choice to convert from the old lighting system to a newer and upgraded one. If you have a fluorescent set up and were wondering how to convert 4ft fluorescent light to LED, we hope this article helped you find the answer precisely!